Are you wondering what to do when there’s no hot water in your house?
The lack of hot water can be a huge inconvenience when it comes to home and personal hygiene. So what do you do if you find yourself in the middle of the night out of hot water?
We’ve got you covered with some of our top tips! Keep reading and let’s get started.
Contents
Check the Water Heater’s Power Supply
First things first, make sure your water heater is receiving power. Sometimes, water heater issues can be due to a tripped circuit breaker or a blown fuse.
Head to your electrical panel and check if the circuit breaker for the water heater is in the “ON” position. If it’s tripped, reset it and see if that solves the problem.
Inspect the Water Heater’s Pilot Light
If you have a gas water heater, it might have a pilot light. When the pilot light goes out, the water won’t heat up. Go to your water heater and look for a small access panel near the bottom.
Open it to find the pilot light. If it’s off, carefully follow the instructions on the water heater to relight it.
If you’re not sure how to do it, call a professional plumber for assistance. You can click for water heater services here and get started with your options.
Check the Thermostat Settings
Water heaters come with thermostats that control the temperature of the water. Someone might have accidentally adjusted the settings, leading to no hot water.
Check the thermostat and ensure it’s set to the desired temperature (usually between 120°F to 140°F). If it’s too low, turn it up a bit and wait for the water to heat.
Inspect for Leaks
Leaks in your water heater or its connections can cause a drop in water pressure. This in turn can hinder the heating process.
Look around the water heater and the pipes connected to it for any signs of leakage. If you find any leaks, it’s best to call a plumber to fix them promptly.
Flush the Water Heater
Mineral deposits can build up inside the water heater over time, reducing its efficiency. Flushing the water heater can help remove these deposits and improve its performance.
To do this, turn off the power supply to the water heater, shut off the water supply, and connect a hose to the drain valve. Open the valve and let the water flow into a nearby drain until it runs clear. Then, close the valve, remove the hose, turn on the water supply, and restore the power.
Deal With No Hot Water in Your House Today
Having no hot water in your house can be a daunting problem, but it’s solvable! Make sure to call a professional if that’s not an option and you can’t handle it yourself.
Seek the help of a specialist and don’t let the cold water keep you down. Take control and make it a priority to get your hot water back and running!
For more home improvement hints and tips, check out the rest of our blog for inspiration.